Hi to those who need the Windows 98 setup information.  I have left the
following message virtually untouched since I cannot take credit for
anything but saving it for future reference.
Hope this helps,
Suzanne Tritten


Windows 98 & JFW 3.2 Setup
From:   [EMAIL PROTECTED] (Dr. SOrdway)

        Hello List,
        The following suggestions for configuring JFW3.2 and Windows 98 were
provided by Dan Clark of Henter-Joyce. I set up my Windows 98 systems in
accordance with the suggestions, set the "Text out delay" to 0 in Windows
Explorer (SHDOCVW.JCF) and **updated the video card drivers**.
        Response is smooth and instantaneous on all drives of each system,
comparable with, or superior to that achieved in Windows 95.

*Windows 98 Configuration Tips.txt*

What to change in Jaws:

Open Configuration Manager when in Windows Explorer or on your Desktop.
This will open the shdocvw.jcf file.  From the Set Options Menu, select
Graphics and Symbols and uncheck the Graphics Mode checkbox.  Press enter on
the OK button and Save the file with a ctrl+s.  This will speed up access to
Windows Explorer.

Open your Default File with a shift+ctrl+d.
Select the Synthesizer Options dialog box from the Set Options menu.  Check
the box labeled "Allow Wave Files with Software Synthesizers".  Press enter
on the OK button and save your file.  This will stop the occasional
stuttering heard with software synthesizers on Windows 98, even on fast
machines.

What to do to Windows 98:

>From the Start Menu, select Settings.  Select Control Panel from the
Settings menu.  When in Control Panel, open the View menu, (alt+v), and make
sure that "View as Web Page" is unchecked.  Select Display from the list of
icons in Control Panel, and select the "Web" Tab.  Uncheck View as Web Page.
On the "Effects" tab, uncheck the "Animate windows, desktop and menus"
checkbox.  Press OK and close Control Panel.  As you navigate, you should by
now see an increase in speed and navigability with Jaws.  Select
Start|Settings|Folder Options.  From the three radio buttons, select Classic
and press OK.  This will allow the My Computer and other icons to display in
the traditional Win95/NT fashion.



Respectfully submitted by: Dr. Sidney Ordway JD, Ph.D.

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of michael d. barber
Sent: Saturday, January 30, 1999 6:49 PM
To: [EMAIL PROTECTED]
Subject: Re: windows98


In fact, why don't you just re-post that to the list for some who may have
missed it.
Thanks.
Michael
At 11:35 AM 1/30/99 -0600, you wrote:
  Hi listers.
  Can someone please send my way the message from Henter-Joyce that talks
  about the configuration of windows98 for better performance with jfw32?
  Warmest thanks in anticipation.
  Mahjoub

  -
  Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw


-
Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw

-
Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw

Reply via email to