With the new disk you have to be running windows and just go to the run
dialog and type hjauth. This should give you some choices.
At 10:47 PM 1/14/99 -0800, you wrote:
>As far as I know the command to remove an authorizationg key from you hard
>drive has not changed. the command was evmove letter of hard drive, a:.
>If that has changed I am unaware of it.
>
>Franklin
>
> At 06:42 PM 1/13/1999 -0000, you wrote:
>>Hi listers. I have recently got one of the new type of authorisation disks
>>from HJ. Could someone post instructions as to how you are supposed to
>>transfer keys from the floppy to the hard disk? I have only had to put one
>>key on to my system, which was automatically transferred as part of the JFW
>>3.2 installation process. Knowing how often I have to mess around with
>>authorisation keys, the day is probably fast approaching when I'm going to
>>have to take it off the hard disk again for some reason, and I'd appreciate
>>some help as to how I should do this. Thanks. Tracey Kier.
>>-----Original Message-----
>>From: Dan roy <[EMAIL PROTECTED]>
>>To: jfw <[EMAIL PROTECTED]>
>>Date: 12 January 1999 21:33
>>Subject: Warning About Authorization Keys
>>
>>
>>>I received a replacement authorization disk today. As I understand it,
>>>there are now 2 different types of authorization keys out there. The
>>>version I have creates a file on the HD called JFW.cps. the big
>>>difference is, before, the only thing that would work when moving the
>>>key was to use evmove and, at least for my setup, had to be in plane
>>>dos to work reliably. This key works differently, this 1 requires that
>>>you be in windows and use the hjauth file to move authorizations back
>>>and forth. It was a little frustrating, when evmove didn't work, I
>>>called HJ tech support. The guy over there was totally stumped too.
>>>After playing around, looking up various error coes that evmove gave
>>>him and check as well, he finally found out that, hjauth had to be
>>>used. I can understand there being some confusion with the 2 different
>>>standards out there, however, what was frustrating was the fact that I
>>>feel that the tech support guy should have known about this. When
>>>evmove didn't work, immediately, we should have tried hjauth. I am not
>>>blaming the support rep, it is a problem with communication at HJ,
>>>apparently, the tech support personel didn't know about this, or at
>>>least, he didn't!
>>>
>>>Anyway, I am posting this to warn you, if anyone gets a new disk and
>>>evmove doesn't work, don't panic and call tech support until after you
>>>have tried hjauth!
>>>
>>>
>>>-
>>>Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
>>
>>-
>>Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
>>
> Franklin Johnson Technology Specialist
>Rehabilitation Research & Training Center On Blindness
>Mississippi State University
>phone 601-3252001
>fax 601-325-8989
>Email [EMAIL PROTECTED]
>[EMAIL PROTECTED]
>
>-
>Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
>
>
Thomas Stivers
-
Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
