Hi,
I had this same problem. The problem was that I had moved the shortcut for
running JFW from my JFW32 folder on the start menu to the Startup group
without leaving a copy of it in the JFW32 folder on the start menu. I hope
this is clear if not e-mail me privately and I'll try again.
At 08:48 PM 1/28/1999 -0500, you wrote:
>Hello to the List:
>On trying to update to the 3.20.31 from 3.20.19, I encountered the
following:
>1. The file was zipped as far as I could tell
>2. A message appeared to the effect that "No path could be found to jfw32
>my system and to check that jfw is installed"
>3. Jaws was actually giving this info, hence it was running,
>4. Checking the "About JFW ..." in the Help menu showed that I have v.
>3.20.19 running.
>5. I tried two downloads: to a temp file and to a floppy, and tried
>installing both from the Run command and by clicking the file.
>
>The only thing I did not do was to copy the file to the JFW 32 folder.
>Should I do that?
>
>Any help would be greatly appreciated.
>Sincerely,
>Yousef
>[EMAIL PROTECTED]
>
>
>-
>Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
>
___________________________________________
CSA Adaptive Products and Services
Karl Smith
4304 South El Camino St.
Taylorsville, Utah 84119
Phone: 801-967-5655
Fax: 801-969-4357
Toll Free: 800-335-4995
E-mail [EMAIL PROTECTED]
- Never confuse an open mind with an empty head.
-
Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
