Hi Walter,
What error did it give when you compiled?
Also, if you are within the text of the script when you hit Control+D, it
should place you in the properties, with the name already filled, and the
"Can be assigned to key" already checked.
What are the lines above and below that line you landed on after the error
message?
If you attach your default.jss file to my e-mail, I'll see if I can track
down the problem! The address is [EMAIL PROTECTED]
Thanks,
Dennis Brown, [EMAIL PROTECTED]
Visit the Blind Programming site at http://www.mindspring.com/~brown99/
----- Original Message -----
From: Walter Siren <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, June 16, 1999 1:50 PM
Subject: Re: Punctuation Rotor in 3.3
> Dennis, I followed every thing but there were a couple of minow variations
> after pasting in the script. After pressing in control+d, the first thing
> that I came to, was the script name, which I typed in, the next thing was
> not the description, I came to assigned key unchecked, so I pressed the
> space bar, then it said checked, then the description, then I came to the
> place that I arrowed down to options, then tabbed to where it asked me for
> the key, and then I pressed insert+p, tabbed to ok, and pressenter, then
> compiled it, but I got an error, when I pressed ok, I landed on this line,
>
> let Level=GetJcfOption(opt_punctuation)+1
>
> What did I do wrong?
> At 10:07 AM 4/21/99 -0400, you wrote:
> >
> >Since it is in such high demand, here is that ChangePunctuation script.
> >Keep in mind that I've only tested this under JFW3.3, I don't know if 3.2
> >has a OPT_PUNCTUATION option.
> >
> >1) Hit Control+Shift+0 to launch the Script Manager with the default
script
> >file loaded.
> >2) Hit Control+End to get to the bottom of the file, then hit the Enter
key
> >to put distance between the previous script and this new script.
> >3) Type in, or cut and paste, the following script:
> >
> >Script ChangePunctuation ()
> >var
> >int Level
> >let Level=GetJcfOption(opt_punctuation)+1
> >SetJcfOption(opt_punctuation,Level)
> >If(GetJcfOption(opt_punctuation) > 3) Then
> >SetJcfOption(opt_punctuation,0)
> >EndIf
> >if GetJcfOption(opt_punctuation) == 0 then
> > SayString("None")
> >Elif GetJcfOption(opt_punctuation) == 1 then
> > SayString("Some")
> >Elif GetJcfOption(opt_punctuation) == 2 then
> > SayString("Most")
> >Elif GetJcfOption(opt_punctuation) == 3 then
> > SayString("All")
> >endif
> >EndScript
> >
> >4) While in this script, hit Control+D to get to the properties dialog.
> >Give the script a Synopsis and Description, then tab down to the AssignTo
> >field and hit Insert+P.
> >Hit Ok and then when back in the Script editor, hit Control+S to compile
the
> >file with the new script.
> >You may need to restart JFW before the script will work.
> >
> >What it does:
> >This script creates a variable named "Level"; uses the GetJcfOption
function
> >to get the current punctuation setting and assigns it to the variable
named
> >Level.
> >It then uses the SetJcfOption function to set the new setting to whatever
> >the current level is, plus 1.
> >It then checks the new level it just set, and if it is greater than the
> >setting of "3", it sets the setting to "0". (Note: the punctuation
settings
> >are 0=None, 1=Some, 2=Most, and 3=All.)
> >Now, it runs the new punctuation level through a series of If/ElIf
> >statements to voice the current setting.
> >
> >Hope this helps!
> >
> >Thanks,
> >Dennis Brown, [EMAIL PROTECTED]
> >Visit the BlindProgramming web site at
> >http://brown99.home.mindspring.com
> >
> >p
> >
> >-----Original Message-----
> >From: GroovePapa <[EMAIL PROTECTED]>
> >To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> >Date: Wednesday, April 21, 1999 8:41 AM
> >Subject: Re: Punctuation Rotor in 3.3
> >
> >
> >>You mean to tell me there's a script that actually allows you to change
the
> >>punctuation level on the fly? Thank you God! Where can I get my hands on
a
> >>copy of this script?
> >>
> >>At 11:46 AM 4/20/99 -0400, you wrote:
> >>>Hello Listers,
> >>>
> >>>Now that support has finally been added to JFW for a script that rotors
> >>>through punctuation levels, and Dennis Brown has written such a script,
I
> >>>think we should all write to [EMAIL PROTECTED] and lobby for this
script
> >>>to be added to JFW 3.3. Actually, I have already done so, and I hope
you
> >>>will all do likewise. Being able to change punctuation on the fly is a
> >>>feature that has been needed in JFW for a long time.
> >>>
> >>>Gary, [EMAIL PROTECTED]
> >>>
> >>>
> >>>-
> >>>Visit the jfw ml web page: http://jfw.cjb.net
> >>>
> >>
> >>-
> >>Visit the jfw ml web page: http://jfw.cjb.net
> >
> >-
> >Visit the jfw ml web page: http://jfw.cjb.net
> >
> >
> Walter
> -
> Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
