Hi Brian;
While you are in the application, press insert+9 to get to the frame
manager. Tab once and arrow to the frame in question and press enter.
Control+ tab once to the position tab. Tab to the width box and increase
the size. tab to OK and press it. Control + s to save the change.
Hope this helps.
David Maynard
Franklin NC
[EMAIL PROTECTED]
[EMAIL PROTECTED]
At 06:38 PM 6/27/99 -0500 Brian C. Hansen Wrote:
I set up a frame in OL Express 5, but it turns out that it's not wide
enough. Is there a way to widen it manually without having to re-define the
boundaries using INSERT-CTRL-[ & INSERT-CTRL-]? The frame is simple enough,
everything is on the same line. I just need to widen it enough so it will
catch 4 more characters. But the initial message appears and disappears so
quickly, that there isn't time to re-set everything using the above
mentioned commands.
Any and all help would be greatly appreciated.
Thanks!
Brian
-
Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
