Here is your answer.
This bulletin can be found at:
ftp://ftp.arkenstone.org/pub/techinfo/ssil/jfwdte.txt
Arkenstone Technical Support Bulletin
Date Created: December, 1999
Subject: Using JAWS for Windows 3.x and Open Book: Ruby
Edition 4.x with the DECtalk Express speech synthesizer
This bulletin describes how to configure Jaws for Windows
3.x to work with Ruby using a DECtalk Express.
Please note:
By default, the Ruby directory is C:\RUBY. The JAWS for
Windows directory is usually c:\jfwXXX (where XXX is the
JFW version number).
1. Copy DTE.DLL from the Ruby directory to the jfw
directory.
2. Edit the JFW.INI file which is located in the jfw
directory.
Change the line:
synth1driver=dte
so that it reads:
synth1driver=ssil
3. Copy OBU.JCF and RUBY.JCF from the BACKUPS subfolder
of Ruby (usually c:\ruby\backups) into the SETTINGS\ENU
subfolder of JFW (for example, c:\jfw331\settings\enu).
You will need to restart jfw before trying to run Ruby.
Arkenstone's Technical Support team provides this
information for you to implement when troubleshooting or
installing our products. This tip and others can be
found at our FTP site in the pub/techinfo area. Get there
from our web page (www.arkenstone.org) or go directly to
our FTP site at ftp.arkenstone.org. If you need further
assistance or have any comments or suggestions, please
email us at [EMAIL PROTECTED]
Copyright (c) 1999 Arkenstone, Inc.
At 09:42 PM 12/8/99 -0600, you wrote:
>I have Ruby installed. Do I need to shut off Jaws before I go into Ruby and
>is there a certain command to shut it off or can I just use the mute on
>vervocity. Thanks for help Jim
>
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>
>
Walter
-
Visit the jfw ml web page: http://jfw.cjb.net
