[Cross-post to JMeter-dev list removed] On 07/01/2009, Woodcock, Simon <swood...@qualcomm.com> wrote: > Help please . . > > I'm I misinterpreting the summary results? Take the following for example . . > > Generate Summary Results + 127 in 14.4s = 8.8/s Avg: 122 Min: 7 > Max: 783 Err: 0 (0.00%) > Generate Summary Results + 7681 in 179.9s = 42.7/s Avg: 1269 Min: 1 > Max: 17388 Err: 0 (0.00%) > Generate Summary Results = 7808 in 194.3s = 40.2/s Avg: 1251 Min: 1 > Max: 17388 Err: 0 (0.00%) > Generate Summary Results + 10258 in 192.9s = 53.2/s Avg: 3589 Min: 1 > Max: 43845 Err: 3 (0.03%) > Generate Summary Results = 18066 in 374.3s = 48.3/s Avg: 2578 Min: 1 > Max: 43845 Err: 3 (0.02%) > Generate Summary Results + 11856 in 188.9s = 62.8/s Avg: 2683 Min: 0 > Max: 45321 Err: 6 (0.05%) > Generate Summary Results = 29922 in 554.4s = 54.0/s Avg: 2620 Min: 0 > Max: 45321 Err: 9 (0.03%) > > Total number of requests are an addition of requests made in each interval - > 127+7681+10258+11856 = 29922
Agreed. > Total time would then, you would assume, be an addition of each of the > interval times - 14.4+179.9+192.9+188.9 = 576.1s No, the total time is calculated independently from the first and last times seen. The variation is due to timer resolution. > However, total time seems to be calculated as - 14.4+180+180+180 = 554.4s > > Where 180s is the default interval time. > > When calculating total request per second, the calculation is: > > 29922 / 554.4 = 53.97 requests per second > > As opposed to: > > 29922 / 576.1 = 51.94 requests per second > > Is there not a discrepancy in the total elapsed time and therefore the > requests per second or am I completely misunderstanding the results given? See above. > Any help clarifying this would be greatly appreciated. > > > Thanks in advance, > > > Simon. > > -- > Simon Woodcock > Staff Engineer / Manager > > QUALCOMM Poole Limited > Voyager House, 253-257 High Street North, Poole, Dorset, BH15 1DX UK > Tel: +44 (0)1202 440610, Fax: +44 (0)1202 440601 > www.qualcomm.com<http://www.qualcomm.com> > This e-mail transmission, and any documents, files or previous e-mail > messages attached to it, may contain confidential information that is legally > privileged. If you are not the intended recipient, or a person responsible > for delivering it to the intended recipient, you are hereby notified that any > disclosure, copying, distribution or use of any of the information contained > in or attached to this message is STRICTLY PROHIBITED. Interception of e-mail > is a crime under the Electronic Communications Privacy Act, 18 U.S.C. > 2510-2521 and 2107-2709. If you have received this transmission in error, > please immediately notify me by reply e-mail at > simon.woodc...@qualcomm.com<mailto:simon.woodc...@qualcomm.com> or by > telephone at +44 (0)1202 207397 and destroy the original transmission and its > attachments without reading them or saving them to disk. Thank you. > > --------------------------------------------------------------------- To unsubscribe, e-mail: jmeter-user-unsubscr...@jakarta.apache.org For additional commands, e-mail: jmeter-user-h...@jakarta.apache.org
