a) How can I make sure that Log In goes first? Because you have specified it first b) but what about percentages Use multiple throughput controllers. I dont think you need a Random order Controller if you use a throughput controller , though obivuosly then the order would be somewhat predictable.
ThreadGroup Once Only Login ThroughPutController (PerCent =10) Area 1 ThroughPutController (PerCent =50) Area 2 ThroughPutController (PerCent =15) Area 3 ThroughPutController (PerCent =25) Area 4 c) How do you come up with a "good" Ramp up number? I normally dont :). What are you trying to achieve with ramp up ? regards deepak On Wed, Mar 10, 2010 at 1:45 PM, Rodolfo Landa <[email protected]>wrote: > Hi Deepak, > > The only reason I have 5 thread groups is that I use them to record their > work with the HTTP Proxy Server. I if a re-arrange them like this: > > Test Plan > - Thread Group > - Once Only (Log in) > - Another Controller (Area 1) > - Another Controller (Area 2) > - Another Controller (Area 3) > - Another Controller (Area 4) > > And change Number of Threads to 100, Ramp up to X and loop to 1 > > a) How can I make sure that Log In goes first? > b) Using a Random Order Controller for each Area will may help me with the > random order but what about percentages? > c) How do you come up with a "good" Ramp up number? > > Regards and thanks for your ideas. > > Rodolfo > > > > On Wed, Mar 10, 2010 at 1:27 PM, Deepak Shetty <[email protected]> wrote: > > > Hi > > is there any particular reason you have multiple thread groups? > > If you only had 1 thread group you could use OnceOnlyController and > > ThroughPutController (and other controllers that you may want to use) > > Note that using a ThreadGroup for login needs additional work if you want > > to > > reuse that authentication across a different thread (which will be the > case > > in different thread groups) > > > > regards > > deepak > > > > On Wed, Mar 10, 2010 at 1:21 PM, Rodolfo Landa <[email protected] > > >wrote: > > > > > All, > > > > > > I just recorded a test plan for a "Persona" (say a clerk) that > typically > > > works in 5 areas. The plan looks like this: > > > > > > Test Plan > > > - Thread Group - (Log in) > > > - Thread Group - (Area 1) > > > - Thread Group - (Area 2) > > > - Thread Group - (Area 3) > > > - Thread Group - (Area 4) > > > > > > All groups initially have 1 User (Thread) / Ramp-up 1 / Loop 1. I > checked > > > the option Run Threads Groups consecutively because I thought that > makes > > > sense that the "Persona" first Logs in. I run it and everything is OK. > > > > > > My question is how can I configure the plan so for example it logs only > > > once > > > and the 10 % is spend doing activities in Area 1, 50 % in area 3, etc. > > > > > > Right now there is one thread per group so total of 5 threads going one > > > after another. I want to make them go randomly but still under the > > > percentages described above. > > > > > > Thanks in advance for your help. > > > > > > Regards, > > > > > > Rodolfo > > > > > >
