Bob,

I tried the new COMPARE script and it worked alot better for me than the
previous ALIGN script. I used this command the following command:

compare {2.1} {1.1} ATOMS {77-82 and a} {41-46 and a} {92-100 and a}
{27-35 and a} ROTATE TRANSLATE

I tried with a few other molecules and it gave me reasonable results. I
would like to try to add the non-bridging oxygens in my overlay to
compare to the "true" backbone. How can I do that? Can I set up my own
SPINE command? Also, I must have missed this is in a previous email, but
what does  "frame *" command do?

I will refrain from asking more question until I get a chance to try to
add the non-bridging oxygens to my overlays.

Thank you again for all your help. Have a good day.

Kersten




>>> Robert Hanson  18/03/10 5:55 AM >>>
OK! We're in. So, that wasn't so bad -- just needed to add a bit of code
that set up an eigenvalue problem. 

Jmol 11.9.34 does the equivalent of PyMol's "pair_fit" (without the
capability to determine atom-atom matchings a priori or to throw out
poor matches). 

The COMPARE command does atom-based or orientation-based
reorientation/superposition.  It will be quite interesting to see how
this compares with PyMol, but I think you will find it to be *just* a
little better than PyMol. Maybe. At least VERY VERY CLOSE. (It's
possible that PyMol is automatically removing outliers, I don't
know....)

Jmol is using an exact solution that utilizes quaternions, not the older
version that requires iteration that I think Pymol is using. In that
sample I had of yours, Kersten, it's possible that you did not use
exactly the atom set you indicated, but if you did, then Jmol is
reporting a very slightly different match than PyMol, with a slightly
smaller RMSD (because it's exact). References for this are below:

#     * see Berthold K. P. Horn,
#     * "Closed-form solution of absolute orientation using unit
quaternions" J.
#     * Opt. Soc. Amer. A, 1987, Vol. 4, pp. 629-642
#     *
http://www.opticsinfobase.org/viewmedia.cfm?uri=josaa-4-4-629&seq=0
#     * 
#     * and Lydia E. Kavraki, "Molecular Distance Measures"
#     * http://cnx.org/content/m11608/latest/

As part of this work, I've added a new predefined atom set SPINE which
includes only the continuous set of atoms making up the "true" backbone
of proteins and nucleic acid. Specifically, spine includes:

     *.CA, *.N, *.C   and   *.P, *.O3', *.O5', *.C3', *.C4', *.C5'

Note that it does not include *.O1P or *.O2P. (Should it?)

To match your data, I used:

spine or connected(_P)

to get all the atoms you said you used (I think -- please check). But I
think you could leave out those O1P and O2P atoms and be just fine.

So here is what I used. t2.pdb is loaded twice so we can compare. 

load files "t1.pdb" "t2.pdb" "t2.pdb"
color {2.1} blue
color {3.1} yellow
frame *
cartoons only
var a={spine or connected(_P)}
compare {2.1} {1.1} ATOMS {77-82 and a} {41-46 and a} {92-100 and a}
{27-35 and a} ROTATE TRANSLATE

The keyword ATOMS is optional. Note that, like PyMol, we can indicate
however many pairs of atom sets we want. Jmol will do the proper ANDing
with the models, so you could use for a protein, for example, just:

compare {2.1} {1.1} atoms {*.CA} rotate translate

And it will do what you expect it to do. 

If you leave out ROTATE or TRANSLATE, Jmol will report the RMSD  before
and after the calculation, but it won't actually do the rotation or
translation. So, for example, for your model there, it reports:

RMSD 0.98 --> 0.95 Angstroms

Apparently Jmol thinks it did better than Pymol. You be the judge. 

http://chemapps.stolaf.edu/jmol/docs/examples-11/align/U4_snRNA_jmol_align.jpg
(orange: target; yellow:PyMol; blue: Jmol

another view (Jmol orange; PyMol red, I think):
http://chemapps.stolaf.edu/jmol/docs/examples-11/align/jmol_pymol_compare.jpg

So that's pretty darned close.

The data for that are in:
http://chemapps.stolaf.edu/jmol/docs/examples-11/align/jmo
l_pymol_compare.pdb

Files can be downloaded at

http://chemapps.stolaf.edu/jmol/docs/examples-11/Jmol-11.zip


Bob


On Tue, Mar 16, 2010 at 7:43 AM, Robert Hanson <[email protected]>
wrote:
Let's go with COMPARE instead of ALIGN. That way we can have all sorts
of flexibility, anywhere from just reporting orientational or coordinate
superposition RMSD, doing just the rotation, doing just the translation,
etc.

Bob


On Mon, Mar 15, 2010 at 2:58 PM, Robert Hanson <[email protected]>
wrote:
essentially. Any situation where you can describe orientations.
Carbohydrates, for example, could be quite amenable. 


On Mon, Mar 15, 2010 at 2:42 PM,  <[email protected]> wrote:
On Mon, 15 Mar 2010 14:33:08 -0500, Robert Hanson <[email protected]>
wrote:
> "Spacial" doesn't really describe it.
>
> The method goes like this:
>
> --Identify pairs of matched residues (as opposed to atoms).
>


So not of general use but limited to the special cases of nucleic acids
and proteins.


Rich

------------------------------------------------------------------------------
Download IntelĀ® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Jmol-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/jmol-users









-- 
Robert M. Hanson
Professor of Chemistry
St. Olaf College
1520 St. Olaf Ave.
Northfield, MN 55057
http://www.stolaf.edu/people/hansonr
phone: 507-786-3107


If nature does not answer first what we want,
it is better to take what answer we get. 

-- Josiah Willard Gibbs, Lecture XXX, Monday, February 5, 1900






-- 
Robert M. Hanson
Professor of Chemistry
St. Olaf College
1520 St. Olaf Ave.
Northfield, MN 55057
http://www.stolaf.edu/people/hansonr
phone: 507-786-3107


If nature does not answer first what we want,
it is better to take what answer we get. 

-- Josiah Willard Gibbs, Lecture XXX, Monday, February 5, 1900






-- 
Robert M. Hanson
Professor of Chemistry
St. Olaf College
1520 St. Olaf Ave.
Northfield, MN 55057
http://www.stolaf.edu/people/hansonr
phone: 507-786-3107


If nature does not answer first what we want,
it is better to take what answer we get. 

-- Josiah Willard Gibbs, Lecture XXX, Monday, February 5, 1900

************************************************************
Please consider the environment.  Do you really need to print this
email?
------------------------------------------------------------------------------
Download Intel&#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Jmol-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/jmol-users

Reply via email to