Yep, that does it, thanks!
So, to have the delay after both frame 12 and frame 25, I do
animation frame [12, 23]
frame *
frame delay 2.0
frame [1-33]
Works like a charm. Thanks!
Now, to make sense of this...
animation frame [12,25]
// normally this would make only those frames visible in the ensuing animation.
But here it almost seems to select those frames, singling them out for the
subsequent frame delay.
frame *
// would normally show all the frames (i.e., models) of the animation at the
same time. What does this accomplih here?
frame delay 2.0
// apparently this now applies only to frames 12 and 23, thanks to the initial
animation frame [ ] command, which seemed to “select" those frames.
frame [1-33]
// resets the frame range so all frames will appear in the animation. This one
I understand. :-) Can you help with the interpretation of the other three?
Frieda
On May 18, 2014, at 6:54 PM, Robert Hanson <[email protected]> wrote:
> Oh, one more command after that:
>
> anim frame [1 -15]
>
>
> where 15 there is your number of frames to set the animation to all frames
> again.
>
> I'm going to add
>
> anim frame []
>
> to do that instead..
>
>
>
>
> On Sun, May 18, 2014 at 5:17 PM, Frieda Reichsman <[email protected]> wrote:
> Sorry, I’m not getting this. What I’m going for is that all frames of the
> animation should be visible. There should be a delay such that frame 12 is
> shown for 2 seconds. How do I show all frames in sequence, but get the delay
> just for one frame?
>
> The following results in only frame 12 being shown…
> animation frame [12]
> frame *
> frame delay 2.0
>
> Thanks,
> Frieda
>
> On May 18, 2014, at 6:08 PM, Frieda Reichsman <[email protected]> wrote:
>
>> Aha, OK, makes sense.
>>
>> So if I want to pause only at frame 12,
>> animation frame [12]
>>
>> Why do you then say,
>> frame *
>>
>> Is that necessary to then play all frames?
>>
>> Thanks,
>> Frieda
>>
>>
>> On May 18, 2014, at 5:56 PM, Robert Hanson <[email protected]> wrote:
>>
>>> Set the desired set of frames (for which you want to set the delay) as
>>> visible
>>>
>>>
>>> On Sun, May 18, 2014 at 4:53 PM, Frieda Reichsman <[email protected]> wrote:
>>>
>>> On May 18, 2014, at 5:52 PM, Robert Hanson <[email protected]> wrote:
>>>
>>>> Set the desired set of frames for which you want to set the day as visible.
>>>
>>> I’m not following that sentence. Must be a typo?
>>>
>>> Frieda
>>>
>>>> For example:
>>>>
>>>> animation frame [1,3,5,9]
>>>> frame *
>>>>
>>>> then set the model delay:
>>>>
>>>> frame delay 2.0
>>>>
>>>> then run your animation.
>>>>
>>>> Sorry, somehow that did not get documented.
>>>>
>>>> Bob
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Fri, May 16, 2014 at 5:26 PM, Frieda Reichsman <[email protected]>
>>>> wrote:
>>>> Hi all,
>>>>
>>>> I am using a series of models as an animation using "anim mode loop". Is
>>>> it possible to add a pause at a given frame? I know we can add pauses at
>>>> the first and last model using
>>>> animation MODE LOOP [time-delay1] [time-delay2]
>>>> But I would like to add a pause every time the animation repeats (loops)
>>>> at one or two different specific frames.
>>>>
>>>> I can think of some workarounds to make this happen, but I am wondering if
>>>> there is a more direct ‘animi’ command that would work here.
>>>>
>>>> Thanks,
>>>> Frieda
>>>>
>>>>
>>>>
>>>> ///////////////////////////////////////////
>>>>
>>>> Frieda Reichsman
>>>> Molecules in Motion
>>>> Interactive Molecular Structures
>>>> http://www.moleculesinmotion.com
>>>>
>>>> ///////////////////////////////////////////
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------------
>>>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
>>>> Instantly run your Selenium tests across 300+ browser/OS combos.
>>>> Get unparalleled scalability from the best Selenium testing platform
>>>> available
>>>> Simple to use. Nothing to install. Get started now for free."
>>>> http://p.sf.net/sfu/SauceLabs
>>>> _______________________________________________
>>>> Jmol-users mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/jmol-users
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Robert M. Hanson
>>>> Larson-Anderson Professor of Chemistry
>>>> St. Olaf College
>>>> Northfield, MN
>>>> http://www.stolaf.edu/people/hansonr
>>>>
>>>>
>>>> If nature does not answer first what we want,
>>>> it is better to take what answer we get.
>>>>
>>>> -- Josiah Willard Gibbs, Lecture XXX, Monday, February 5, 1900
>>>>
>>>> ------------------------------------------------------------------------------
>>>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
>>>> Instantly run your Selenium tests across 300+ browser/OS combos.
>>>> Get unparalleled scalability from the best Selenium testing platform
>>>> available
>>>> Simple to use. Nothing to install. Get started now for free."
>>>> http://p.sf.net/sfu/SauceLabs_______________________________________________
>>>> Jmol-users mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/jmol-users
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
>>> Instantly run your Selenium tests across 300+ browser/OS combos.
>>> Get unparalleled scalability from the best Selenium testing platform
>>> available
>>> Simple to use. Nothing to install. Get started now for free."
>>> http://p.sf.net/sfu/SauceLabs
>>> _______________________________________________
>>> Jmol-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/jmol-users
>>>
>>>
>>>
>>>
>>> --
>>> Robert M. Hanson
>>> Larson-Anderson Professor of Chemistry
>>> St. Olaf College
>>> Northfield, MN
>>> http://www.stolaf.edu/people/hansonr
>>>
>>>
>>> If nature does not answer first what we want,
>>> it is better to take what answer we get.
>>>
>>> -- Josiah Willard Gibbs, Lecture XXX, Monday, February 5, 1900
>>>
>>> ------------------------------------------------------------------------------
>>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
>>> Instantly run your Selenium tests across 300+ browser/OS combos.
>>> Get unparalleled scalability from the best Selenium testing platform
>>> available
>>> Simple to use. Nothing to install. Get started now for free."
>>> http://p.sf.net/sfu/SauceLabs_______________________________________________
>>> Jmol-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/jmol-users
>>
>> ------------------------------------------------------------------------------
>> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
>> Instantly run your Selenium tests across 300+ browser/OS combos.
>> Get unparalleled scalability from the best Selenium testing platform
>> available
>> Simple to use. Nothing to install. Get started now for free."
>> http://p.sf.net/sfu/SauceLabs_______________________________________________
>> Jmol-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/jmol-users
>
>
> ------------------------------------------------------------------------------
> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
> Instantly run your Selenium tests across 300+ browser/OS combos.
> Get unparalleled scalability from the best Selenium testing platform available
> Simple to use. Nothing to install. Get started now for free."
> http://p.sf.net/sfu/SauceLabs
> _______________________________________________
> Jmol-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/jmol-users
>
>
>
>
> --
> Robert M. Hanson
> Larson-Anderson Professor of Chemistry
> St. Olaf College
> Northfield, MN
> http://www.stolaf.edu/people/hansonr
>
>
> If nature does not answer first what we want,
> it is better to take what answer we get.
>
> -- Josiah Willard Gibbs, Lecture XXX, Monday, February 5, 1900
>
> ------------------------------------------------------------------------------
> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
> Instantly run your Selenium tests across 300+ browser/OS combos.
> Get unparalleled scalability from the best Selenium testing platform available
> Simple to use. Nothing to install. Get started now for free."
> http://p.sf.net/sfu/SauceLabs_______________________________________________
> Jmol-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/jmol-users
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
Jmol-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/jmol-users
