Andy wrote: snip, 1. In track inspector, Press enter on module options and make sure that eq and pan are checked. Phil replied: that should read: EQ and Plot.
Regards, Phil Muir Accessibility Training Telephone: US (615) 713-2021 UK +44-1747-821-794 Mobile: UK +44-7968-136-246 E-mail: [email protected] URL: http://www.accessibilitytraining.co.uk/ _____ From: [email protected] [mailto:[email protected]] On Behalf Of Andy B. Sent: 05 August 2010 09:09 To: 'JSonar -- JAWS Scripts for Sonar list' Subject: Re: [Jsonar] Using Track EQ in Track Inspector 1. In track inspector, Press enter on module options and make sure that eq and pan are checked. 2. In track inspector, go to display, press enter and uncheck everything except fx and plot and eq. 3. When you arrow through the controls, you will see by default 1 band of eq at a time. This is the eq parameters for a band at a time. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Peter Torpey Sent: Wednesday, August 04, 2010 9:51 PM To: 'JSonar -- JAWS Scripts for Sonar list' Subject: [Jsonar] Using Track EQ in Track Inspector Are the Track EQ parameters accessible using JSonar? I couldn't figure out how to view and/or use the track EQ parameters from within the track inspector. The Sonar help file says one has to optionally turn this on via the console view (which is not accessible using JSonar). --Pete
_______________________________________________ Find JSonar and Sonar FAQs, articles, guides and downloads at jsonar.org. Jsonar mailing list [email protected] http://jsonar.org/mailman/listinfo/jsonar_jsonar.org
