There is no easy way to do this with jsonar.
This has been a long standing issue, and the way i solved it is to use buses.
I put one effect per bus, and then it is easy to re-route your buses
so effects are in order, also this gives you the ability to deal with
eq anywhere along the chain, or enable or disable effects, and it is
more in line with how it happens on a board in the real world.
Gain staging is easier to monitor with this arrangement too.
If you are careful with your mouse, you can sometimes put the mouse
before or after an effect in the inspector and insert an effect
before or after another effect.
But once it's done, your stuck with it.
So i don't recommend stacking lots of effects on one bus or track.
YOu can still save out track templates and get everything back for
your lovely vocal or guitar chains you create, they'll just show up
spread across different buses.
Best regards.
At 03:24 PM 7/20/2011, you wrote:
Hi JSonarians :),
What is the easiest way to re-arrange the order of effects in the FX bin
using JSonar? For example if going from left to right you have, "Delay, EQ,
Modulator" and you want instead "EQ, Modulator, Delay".
Also, do the effects take place in the order we read them as we go from left
to right with the arrow keys?
Thanks,
Nicki D
_______________________________________________
Find JSonar and Sonar FAQs, articles, guides and downloads at jsonar.org.
Jsonar mailing list
[email protected]
http://jsonar.org/mailman/listinfo/jsonar_jsonar.org
For all your audio production needs and technology training, visit us at
www.affordablestudioservices.com
or contact
Chris Belle
[email protected]
or
Stephie Belle
[email protected]
for customized web design
_______________________________________________
Find JSonar and Sonar FAQs, articles, guides and downloads at jsonar.org.
Jsonar mailing list
[email protected]
http://jsonar.org/mailman/listinfo/jsonar_jsonar.org
