Michelle, Pete, Tim, I just tested Pete's thoughts, and yes that does work for removing automations on tracks. It is however a bit tricky for buses as I don't have a way of selecting a particular bus. So by selecting all (meaning all tracks) you can remove automations placed on buses as well. I had a fade out on the master bus which I tried to remove but couldn't and had to overwrite it by recording a new automation over it. Using the delete track/bus automation I was able to do it. Remember not to check the event if all you want to do is to delete automation. HTH Nicki D ----- Think not with your EYES and you shall have a perfect VISION! ---
_____ From: [email protected] [mailto:[email protected]] On Behalf Of Tim Burgess Sent: Monday, August 08, 2011 12:24 PM To: 'JSonar -- JAWS Scripts for Sonar discussion list' Subject: Re: [Jsonar] Two automation questions Pete, You're correct so long as you're dealing with tracks. Unfortunately, you can't do the same for buses. Best wishes. Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822 Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm From: [email protected] [mailto:[email protected]] On Behalf Of Peter Torpey Sent: 08 August 2011 19:52 To: 'JSonar -- JAWS Scripts for Sonar discussion list' Subject: Re: [Jsonar] Two automation questions I wonder if the Edit / delete function can remove the automation events. When you get into the Delete dialog there are check boxes for what kind of thing you want to delete. I am guessing that the controller commands are "Events" and will be deleted if the Events checkbox is checked (but make sure you don't check "Delete Notes"!). --Pete From: [email protected] [mailto:[email protected]] On Behalf Of Nicki D Sent: Monday, August 08, 2011 1:03 PM To: 'JSonar -- JAWS Scripts for Sonar discussion list' Subject: Re: [Jsonar] Two automation questions Michelle, When you are on the track in question bring up the event view window. Arrow to the audio event column. You may see something like "shape" indicated beside "audio". Try deleting these shape events. That may remove your automation(s). If for some reason you don't see shape (which is entirely possible) try re-recording the automation by making sure that you start the re-recording of the automation either before or at the location where the old automation started. I too realize that it is not very easy to undo automation, especially after the "undo" is no longer an option. HTH Nicki D ----- Think not with your EYES and you shall have a perfect VISION! --- _____ From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, August 05, 2011 4:07 PM To: JSonar -- JAWS Scripts for Sonar list Subject: [Jsonar] Two automation questions First, how do I just erase everything in my automations and start over? Is there a way to do that? This is after undo doesn't work any more. Turning the feature off and then setting the volume to a certain level then turning the read and write functions back on doesn't seem to erase anything. Second question, I can't seem to get small changes to stick. I might make a change and then decide that it was too big a change. I press play and then adjust. I hear the adjustment in my headphones. I press stop. When I press play again, the stupid thing goes back where I had it when I made the adjustment that was wrong.
_______________________________________________ Find JSonar and Sonar FAQs, articles, guides and downloads at jsonar.org. Jsonar mailing list [email protected] http://jsonar.org/mailman/listinfo/jsonar_jsonar.org
