in the file below entry defines it # Defines the general setup for the MAAS environment, including the
# username and password for the host as well as the MAAS server. user: ubuntu password: ubuntu But you need to redeploy to test. Thanks and Regards, Narinder Gupta (PMP) narinder.gu...@canonical.com Canonical, Ltd. narindergupta [irc.freenode.net] +1.281.736.5150 narindergupta2007[skype] Ubuntu- Linux for human beings | www.ubuntu.com | www.canonical.com On Tue, Dec 8, 2015 at 8:16 PM, zhangyuanyou <zhangyuan...@huawei.com> wrote: > Hi Narinder Gupta, > > Now I am use the user onos ,password root, > > Where should I modify in the file deployments.yaml? > > Could you show me? > > > > Thanks and Regards, > > yuanyou > > > > *发件人:* zhangyuanyou > *发送时间:* 2015年12月7日 9:48 > *收件人:* 'Narinder Gupta' > *抄送:* artur.tyl...@canonical.com; billy.ol...@canonical.com; > Weidong.Shao; juju@lists.ubuntu.com > *主题:* 答复: 答复: Using maas+juju to deploy openstack,I can't run > 02-maasdeploy.sh successfully. > > > > Hi Narinder Gupta, > > I can login maas server by ssh onos@192.168.212.140 successfully. > > I had uploaded the file ,please check it. > > Thanks for your help! > > > > Yuanyou > > > > *发件人:* Narinder Gupta [mailto:narinder.gu...@canonical.com > <narinder.gu...@canonical.com>] > *发送时间:* 2015年12月5日 23:20 > *收件人:* zhangyuanyou > *抄送:* artur.tyl...@canonical.com; billy.ol...@canonical.com; > Weidong.Shao; juju@lists.ubuntu.com > *主题:* Re: 答复: Using maas+juju to deploy openstack,I can't run > 02-maasdeploy.sh successfully. > > > > Yuanyou, > > Will you please send me following details? > > > > deployments.yaml file also script 02-maasdeployment.sh > > > > Also try the following: > > > > try to ssh into the maas server and see whether it works or not? ssh > *onos@192.168.212.140 > <onos@192.168.212.140>** also whether you are able to ping or not to > 192.168.212.140.* > > > > *Also please send me your jump host config details. specially > /etc/network/interfaces file.i* > > > Thanks and Regards, > > Narinder Gupta (PMP) narinder.gu...@canonical.com > > Canonical, Ltd. narindergupta [irc.freenode.net] > > +1.281.736.5150 narindergupta2007[skype] > > > > Ubuntu- Linux for human beings | www.ubuntu.com | www.canonical.com > > > > On Sat, Dec 5, 2015 at 2:50 AM, zhangyuanyou <zhangyuan...@huawei.com> > wrote: > > Hi Narinder Gupta, > > I had to change to user onos,but it doesn’t work. Is it shoulb be user > ubuntu? > > My host environment is like this: > > Maas server : > > Ip:192.168.212.140 > > user :root > > password:root > > > > user:onos > > password:root > > Thanks, > > Yuanyou > > > > *发件人:* Narinder Gupta [mailto:narinder.gu...@canonical.com] > *发送时间:* 2015年12月5日 14:50 > *收件人:* zhangyuanyou > *抄送:* artur.tyl...@canonical.com; billy.ol...@canonical.com; > Weidong.Shao; juju@lists.ubuntu.com > *主题:* Re: Using maas+juju to deploy openstack,I can't run > 02-maasdeploy.sh successfully. > > > > For more information about ATT recent setup please follow this link which > works well https://wiki.opnfv.org/copper/academy/joid > > > > > > > Thanks and Regards, > > Narinder Gupta (PMP) narinder.gu...@canonical.com > > Canonical, Ltd. narindergupta [irc.freenode.net] > > +1.281.736.5150 narindergupta2007[skype] > > > > Ubuntu- Linux for human beings | www.ubuntu.com | www.canonical.com > > > > On Sat, Dec 5, 2015 at 12:34 AM, Narinder Gupta < > narinder.gu...@canonical.com> wrote: > > Hi Yuanyou, > > Will you please let me know your host environment and I am wondering you > are using root user? I have not tested 02-maasdeploy.sh script with root > user yet. Will you please try it with ubuntu user? > > > > Will you please try this with latest git repository as i checked in few > changes recently within couple of days for JOID. > > > > In new version i have added default lab which is very much like you > are trying the MAAS on. I tried to configure the ssh appropriately in > script before i copy the values. So may be running as ubuntu user should be > good. Also in yaml file try the ubuntu user. > > > > Same was tested by 4 different labs so far it is working. > > > > > Thanks and Regards, > > Narinder Gupta (PMP) narinder.gu...@canonical.com > > Canonical, Ltd. narindergupta [irc.freenode.net] > > +1.281.736.5150 narindergupta2007[skype] > > > > Ubuntu- Linux for human beings | www.ubuntu.com | www.canonical.com > > > > On Fri, Dec 4, 2015 at 8:35 PM, zhangyuanyou <zhangyuan...@huawei.com> > wrote: > > Hi Artur Tyloch, > I'm working on maas+juju to deploy openstack,now I edit the > 02-maasdeploy.sh and excute it. > But this line "maas-deployer -c deployment.yaml -d --force" can't pass ,it > always let me to input the password like this: > > *2015-12-04 17:45:54,032 DEBUG Executing: 'virt-install --connect > qemu:///system --name opnfv-maas-intel --ram 4096 --vcpus 4 --disk > vol=default/opnfv-maas-intel-root.img,format=qcow2,bus=virtio,io=native > --disk > vol=default/opnfv-maas-intel-seed.img,format=raw,bus=virtio,io=native > --network bridge=brAdm,model=virtio --network bridge=brData,model=virtio > --network bridge=brPublic,model=virtio --noautoconsole --vnc --import' > stdin=''* > *2015-12-04 17:45:55,145 DEBUG Executing: 'virsh -c qemu:///system > autostart opnfv-maas-intel' stdin=''* > *2015-12-04 17:45:55,162 DEBUG Waiting for MAAS vm to come up for ssh..* > *2015-12-04 17:45:55,163 DEBUG Using ip address specified: 192.168.212.140* > *2015-12-04 17:45:55,163 DEBUG Executing: 'ssh -i /root/.ssh/id_maas -o > UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no > root@192.168.212.140 <root@192.168.212.140> true' stdin=''* > > > *root@192.168.212.140's <root@192.168.212.140's> password: *I edited the > file deployment.yaml like this: > *demo-maas:* > * maas:* > * # Defines the general setup for the MAAS environment, including > the* > * # username and password for the host as well as the MAAS server.* > * user: root* > * password: root* > > * # Contains the virtual machine parameters for creating the MAAS > virtual* > * # server. Here you can configure the name of the virsh domain, > the* > * # parameters for how the network is attached.* > * name: opnfv-maas-intel* > * interfaces: > ['bridge=brAdm,model=virtio','bridge=brData,model=virtio','bridge=brPublic,model=virtio']* > * memory: 4096* > * vcpus: 4* > * arch: amd64* > * pool: default* > * disk_size: 160G* > > * # Apt http proxy setting(s)* > * apt_http_proxy:* > > * apt_sources:* > * - ppa:maas/stable* > * - ppa:juju/stable* > > * # Virsh power settings* > * # Specifies the uri and keys to use for virsh power control of > the * > * # juju virtual machine. If the uri is omitted, the value for the* > * # --remote is used. If no power settings are desired, then do not* > * # supply the virsh block.* > * virsh:* > * rsa_priv_key: /home/ubuntu/.ssh/id_rsa* > * rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub* > *# uri: qemu+ssh://ubuntu@10.4.1.1/system > <http://ubuntu@10.4.1.1/system>* > > * # Defines the IP Address that the configuration script will use > to* > * # to access the MAAS controller via SSH.* > ip_address: 192.168.212.140 > > Could you help me to resolve the question ? Any assistance is greatly > appreciated. > > Thanks. > Yuanyou > > > > > > > > -- > Juju mailing list > Juju@lists.ubuntu.com > Modify settings or unsubscribe at: > https://lists.ubuntu.com/mailman/listinfo/juju > > > > > > >
-- Juju mailing list Juju@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/juju