Hello there, After upgrading our M7i to 8.1R1.5 we've experienced the following problem: > show chassis alarms
2 alarms currently active Alarm time Class Description 2007-01-15 10:07:34 UTC Major PEM 1 Unrecognized for the platform 2007-01-15 10:07:33 UTC Major PEM 0 Unrecognized for the platform Both of these are 1GE Gbic-based interfaces which apear to be working fine at this moment (i'm working remotely on this m7i). > show chassis hardware Hardware inventory: Item Version Part number Serial number Description Chassis A5120 M7i Midplane REV 04 710-008761 CX9960 M7i Midplane Power Supply 0 Rev 06 740-008537 6338240 AC Power Supply Power Supply 1 Rev 06 740-008537 6317596 AC Power Supply Routing Engine REV 03 740-011202 1000617216 RE-850 CFEB REV 07 750-010463 CX9833 Internet Processor II FPC 0 E-FPC PIC 0 REV 07 750-010238 CW9328 1x G/E SFP, 1000 BASE Xcvr 0 REV 01 740-011782 P9B0U51 SFP-SX FPC 1 E-FPC PIC 2 BUILTIN BUILTIN 1x Tunnel PIC 3 REV 08 750-009099 CX9819 1x G/E, 1000 BASE Xcvr 0 REV 01 740-011783 PA70JCC SFP-LX > show chassis craft-interface Red alarm: LED on, relay off Yellow alarm: LED off, relay off Routing Engine OK LED: On Routing Engine fail LED: Off Could You please give mi a hint what could be the source of the problem? Any help is appreciated; -- All the best, P.G. Krol _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp