Hi, The configuration is the same like configuring normal route reflector except you must enable family inet-vpn for L3VPN. The important thing is you must have a LSP to all PEs because without LSP or reachability, the RR will mark the routes as unusable and not advertised it to the PEs.
Cheers, Benny snort bsd <[EMAIL PROTECTED]> wrote: Hi all: Just read through the white paper "BGP Route Reflection in Layer 3 VPN Networks". Usually MBGP is activated on PE routers; ie. PE-to-PE and P routers need no configuration of MBGP. But with the Router Reflectors in the middle of PATHs of PE-to-PE, how could this be implemented? Does anyone here ever configured this? Thanks in Advance Send instant messages to your online friends http://au.messenger.yahoo.com _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp --------------------------------- The fish are biting. Get more visitors on your site using Yahoo! Search Marketing. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp