Does anyone have experience in monitoring of jitter, rtt in a Juniper core environement? My aim is to monitor different forwarding-classes traffic, i.e EF, AF, BE. I have configured this and I it looks good except that I don't know how to force the traffic through a specific forwarding-class. The monitoring is using the best-effort queue only. [EMAIL PROTECTED] show services rpm probe Probe1 { test test-ef { probe-type udp-ping; target address 192.168.10.1; probe-count 10; probe-interval 1; test-interval 1; destination-port 65522; source-address 192.168.5.1; dscp-code-points 101000; data-size 100; } } Thanks, Dan
---------------------------------------------------------------------------------------------------------- Synetrix Holdings Limited Tel: +44 (0)1252 405 600 www.synetrix.co.uk IMPORTANT NOTICE: This message is intended solely for the use of the Individual or organisation to whom it is addressed. It may contain privileged or confidential information. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you should not use, copy, alter, or disclose the contents of this message. All information or opinions expressed in this message and/or any attachments are those of the author and are not necessarily those of Synetrix Holdings Limited. Synetrix Holdings Limited accepts no responsibility for loss or damage arising from its use, including damage from virus. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp