Hi Jeorg, Starting with the 'obvious' is always a good idea :)
What other events are taking place on the router at the same time of (or prior to) relatively high loads? Any link flaps, neighborships going down/up etc? Also, you may check whether this is a particular issue (every n time) or not to have a better idea. HTH On 2/16/07, Joerg Staedele / Trusted Network GmbH <[EMAIL PROTECTED]> wrote: > Hi there, > > i still have a strange behaviour on our M7i. The CFEB load goes up to > 20%, then goes down to <5% then up again and so on. > > I really have no idea what is causing this. We have several other > routers (M5/M10/M20) that all behave normal. > > The behaviour of the m7i is also seen in our smokeping that monitors all > our routers. you can see that the m7i has higher loads and responds > "slower" more often than the others to icmp querys. > > So i just want to know what is causing the higher cpu on the cfeb but > dont know how. > > What things are done in cpu on the cfeb? Maybe a list would give me a hint. > > Any ideas? > > Thanks in advance. > > Regards, > > Joerg > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Erdem _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp