Yes, but you must physically leave the router. You can easilly do this with a small switch and vlans on the 1 physical ERX intf on diff VRs..
On 2/28/07, phil colbourn <[EMAIL PROTECTED]> wrote: > Is it possible to establish links between VRs? For example to simulate a > network of routers. > > > > This e-mail and any attachments may contain confidential information that is > intended solely for the use of the intended recipient and may be subject to > copyright. If you receive this e-mail in error, please notify the sender > immediately and delete the e-mail and its attachments from your system. You > must not disclose, copy or use any part of this e-mail if you are not the > intended recipient. Any opinion expressed in this e-mail and any attachments > is not an opinion of RailCorp unless stated or apparent from its content. > RailCorp is not responsible for any unauthorised alterations to this e-mail > or any attachments. RailCorp will not incur any liability resulting directly > or indirectly as a result of the recipient accessing any of the attached > files that may contain a virus. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp