Hi Juan, Did you try with I2J tool on Juniper website with whole config?
https://i2j.juniper.net/release/index.jsp (you'll need to be a registered customer) If you provide more snippets of configuration (like interfaces belonging to VRF, your bgp import/export policies) I'll try to help more. Cheers, On 3/5/07, Juan C. Crespo R. <[EMAIL PROTECTED]> wrote: > Dears > > Anyone could help me translating this config from a Cisco to a > Juniper M20? > > STATIC ROUTE > ip route X.X.X.X 255.255.255.252 Serial0 name L3VPN > > > ip vrf L3VPN > rd ASASA:000000001 > route-target export ASASA:000000001 > route-target import ASASA:000000002 > > > address-family vpnv4 > neighbor a.b.c.d peer-group iBGP-GROUP > > address-family ipv4 vrf L3VPN > redistribute connected > redistribute static > no auto-summary > no synchronization > exit-address-family > > Thanks > > JC > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp