> I need help about RSVP-TE implementation between Cisco Router 7600 and > Juniper M20. > > When the tunnel MPLS-TE is established between these routers and exist more > than one hop the delay increases. > > Somebody know about some case with MPLS-TE between Cisco and Juniper router?
Can't help you with the 7600 specifically - but we've certainly had quite a few TE tunnels between Juniper M routers and Cisco 7200 routers. Fairly minimal example: protocols { mpls { label-switched-path CR3.BO-CR2.HT { to 193.75.0.20; } } } interface Tunnel3 description CR2.HT-CR3.BO ip unnumbered Loopback0 tunnel destination 193.75.0.13 tunnel mode mpls traffic-eng tunnel mpls traffic-eng priority 7 7 tunnel mpls traffic-eng path-option 1 dynamic MPLS TE interoperability between Juniper and Cisco worked reasonably well for us. Steinar Haug, Nethelp consulting, [EMAIL PROTECTED] _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp