We don't have support contract yet, but we could ask to Juniper one RMA 
even if we don't have one?

Thanks

senad palislamovic escribió:
> You don't change the HDD, but RMA the RE.  Yes, if you could fine a same spec 
> HDD, you could actually swap the HDD yourself.  However, Juniper uses a 
> specific HDD sets from diff. manufactures built for specific network 
> purposes, HA, lots of logging, 24/7 environment.  There isn't a lot of HDD of 
> this kind on the market.  I would rather RMA-it.
>
> ----- Original Message ----
> From: Juan C. Crespo R. <[EMAIL PROTECTED]>
> To: Juan C. Crespo R. <[EMAIL PROTECTED]>
> Cc: Juniper Request Help List <juniper-nsp@puck.nether.net>
> Sent: Thursday, March 22, 2007 11:33:38 AM
> Subject: Re: [j-nsp] Issues with Boot
>
>
> By the way, I want ask you, It is possible change the Hard Drive without 
> any problem?
>
> Thanks
>
> Juan C. Crespo R. escribió:
>   
>> but I have another problem, when I try to install with the Ata Flash 
>> Disk, it shows FreeBSD installation Menu, not the automatic install process,
>>
>> Any Idea?
>>
>> senad palislamovic escribió:
>>   
>>     
>>> Based on that it seems that you have lost your bootable image across the 
>>> board, your CFlash and HDD.  Only way to recover is use PCMCIA card with 
>>> jinstall-media image.  This will format all of it (CF and HDD) and it will 
>>> fix the problem (you will loose the config).  If this does not work and you 
>>> get more ad0 or ad1 errors, your CF and/or HDD are bad.  RMA it.
>>>
>>> ----- Original Message ----
>>> From: Juan C. Crespo R. <[EMAIL PROTECTED]>
>>> To: Juniper Request Help List <juniper-nsp@puck.nether.net>
>>> Sent: Wednesday, March 21, 2007 7:19:03 PM
>>> Subject: [j-nsp] Issues with Boot
>>>
>>>
>>> Hi dears
>>>
>>>
>>>     I'm getting problem booting one M20, I try to make it boot from one 
>>> ATA compact flash with the Junos Ver 4 and looks like the CF was broken  
>>> or something wrong, I just remember the unit was alarming with Heat, but 
>>> was working Ok. The M20 was working with Junos 7.4  Ver.
>>>
>>> Trying to Boot from PCMCIA ATA Flash Card...
>>> Error: No Drive E...
>>>
>>> Trying to Boot from Hard Disk...
>>> Error: No Drive D...Trying to Boot from PCMCIA ATA Flash Card...
>>> Error: No Drive E...
>>>
>>> Trying to Boot from Hard Disk...
>>> Error: No Drive D...Trying to Boot from PCMCIA ATA Flash Card...
>>> Error: No Drive E...
>>>
>>> Trying to Boot from Hard Disk...
>>> Error: No Drive D...
>>>
>>>     Could any one help me with some Idea??
>>>
>>> Thanks
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp@puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>>>
>>>  
>>> ____________________________________________________________________________________
>>> Food fight? Enjoy some healthy debate 
>>> in the Yahoo! Answers Food & Drink Q&A.
>>> http://answers.yahoo.com/dir/?link=list&sid=396545367
>>>
>>>
>>>
>>>   
>>>     
>>>       
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>
>>
>>   
>>     
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>  
> ____________________________________________________________________________________
> Never miss an email again!
> Yahoo! Toolbar alerts you the instant new Mail arrives.
> http://tools.search.yahoo.com/toolbar/features/mail/
>
>
>
>   
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to