gr-0/0/0 { unit 1 { tunnel { source y.y.y.y; destination x.x.x.x; } family inet { address 10.1.10.2/30; } }
Joe Horton 972-663-3010 mailto://[EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Sandiford Sent: Sunday, March 25, 2007 12:23 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] GRE Tunnel on J-4350 Hello All: I'm very new to JunOS having worked exclusively with Cisco for over 12 years. Our organization has just purchased our first Juniper product, a J4350. I'm trying to figure out how to setup simple GRE tunnels on the J4350 similar to the Cisco's version below. interface Tunnel1 description Tunnel to Oshawa office ip address 10.1.10.1 255.255.255.252 tunnel source x.x.x.x tunnel destination y.y.y.y ! In fact, I have to configure the J4350 to bring up a tunnel to a Cisco that is configure just like above. I have searched the docs that I have and online for this, but I haven't been able to find it. I find lots for IPSEC, but I'm not looking for that. I just need a simple GRE tunnel. Any help would be greatly appreciated. Regards, Bill _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp