Giuliano, On Juniper M-series, there is an ICMP TTL-exceeded rate-limit in place: 50 pps per logical interface and 500 pps per box. See http://puck.nether.net/pipermail/cisco-nsp/2006-June/031717.html Rgds Alex
----- Original Message ----- From: "Giuliano Cardozo Medalha" <[EMAIL PROTECTED]> To: <juniper-nsp@puck.nether.net> Sent: Saturday, April 21, 2007 8:51 PM Subject: [j-nsp] M7i and M10i problems - TRACE ROUTE > People, > > We have a Juniper M10i border router. > > When we install this router on our network ... we are having problems > with MTR and traceroute programs. > > Basically ... every trace that pass trough the router lose 70% of the > packets. > > PING just works fine ... but TRACE and MTR not. > > Juniper saids in J-TAC that this is a default config (FACTORY DEFAULT) > from the router. > > There is some command or way to change this behavior ? > > Thanks a lot, > > Giuliano > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp