Or, you can use firewall filters that do rate-limiting on different units.
My point stands if you want to do CoS on these units. (sorry for the 'reply-before-reading' act) :) Cheers, Erdem On 4/26/07, Erdem Sener <[EMAIL PROTECTED]> wrote: > Hi Jose, > > You need IQ pic to configuer 'per-unit-scheduler' (which is what > you're looking for) > > Cheers, > Erdem > > On 4/26/07, Jose Sanchez <[EMAIL PROTECTED]> wrote: > > Hi, > > > > Does anybody know if I can rate limit (ingress and egress) per VLAN in a > > Gigabit Ethernet Interface. > > > > > > Thank you > > > > Best regards > > > > Jose Sanchez > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp