Incorrect. From the JUNOS release notes: When upgrading or downgrading the JUNOS software, always use the jinstall package. Use other packages (such as the jbundle package) only when so instructed by a Juniper Networks support representative. For information about the contents of the jinstall package and details of the installation process, see the JUNOS System Basics Configuration Guide.
Regardless, this doesn't help Yevgeniy with his problem. Yevgeniy, is there any way you can do a fully clean install with the PCMCIA card using the Install Media JUNOS version? -evt > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Juan C. Crespo R. > Sent: Thursday, May 10, 2007 8:44 AM > To: Yevgeniy Voloshin > Cc: juniper-nsp@puck.nether.net > Subject: Re: [j-nsp] Problem with boot after JunOS upgrade > (7.5 -> 8.1R3.3) > > jinstall images are for clean install, the correct image for > update its > jbundle > > Regards :D > > JC > > Yevgeniy Voloshin escribió: > > Hi Group, > > > > I have a problem with boot on M7i after upgrade JunOS: > > request system software validate /var/tmp/jinstall- > > 8.1R3.3-export-signed.tgz > > request system software add > /var/tmp/jinstall-8.1R3.3-export-signed.tgzreboot > > > > JunOS validation was OK, and after the reboot it didn't > come up. Console > > messages show cyclic reboot by watchdog timeout. > > Only this console port connection is available. How to > recover this under > > such a constraints? > > > > No /kernel > > > >>> FreeBSD/i386 BOOT > >>> > > Default: 0:ad(0,a)/kernel > > boot: H > > > > > > > > Award Modular BIOS v4.51PG, An Energy Star Ally > > Copyright (C) 1984-98, Award Software, Inc. > > > > BIOS Version 1.8 > > 09/18/2003-i440BX-SMC67X-2A69TU00C-00 > > > > > > WARNING: History show a reset caused by the WatchDog > > Will try to boot from : > > PCMCIA ATA Flash Card > > Compact Flash > > Primary IDE Hard Disk > > Ethernet > > > > Trying to Boot from Ethernet > > > > Intel UNDI, PXE-2.0 (build 078) > > Copyright (C) 1997,1998,1999 Intel Corporation > > PXE-E61: Media test failure, check cable > > PXE-M0F: Exiting Intel PXE ROM. > > > > Trying to Boot from PCMCIA ATA Flash Card > > Trying to Boot from Compact Flash > > > > Trying to Boot from Primary IDE Hard Disk > > Loading /boot/loader > > No /boot/loader, next boot from alternate path > > Loading /cf/boot/loader > > No /cf/boot/loader > > > >>> FreeBSD/i386 BOOT > >>> > > Default: 0:ad(0,a)/kernel > > boot: ;1R > > > > > > TIA! > > --- > > Yev. > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
