Hello list, today I found the following messages in my /var/log/messages:
Jun 9 19:59:53 re0 /kernel: Nexthop index allocation failed: regular index space exhausted That messages occures several times. The hardware is a Juniper M20 with SSB-E and standard FPC. ge-0/0/0 and ge-1/0/0 are members of an aggregated ethernet interface. The problem is, that the router cannot learn new ARP entries anymore. Here is some output from JunOS: [EMAIL PROTECTED]> show chassis ssb SSB status: Slot 0 information: State Backup Slot 1 information: State Master Temperature 31 degrees C / 87 degrees F CPU utilization 18 percent Interrupt utilization 2 percent Heap utilization 76 percent Buffer utilization 63 percent Total CPU DRAM 64 MB Internet Processor II Version 1, Foundry IBM, Part number 9 Start time: 2007-04-18 02:34:09 CEST Uptime: 52 days, 17 hours, 35 minutes, 18 secons [EMAIL PROTECTED]> show route forwarding-table summary Routing table: inet Internet: user: 216958 routes perm: 4 routes intf: 246 routes dest: 7568 routes ifdn: 1 routes iddn: 3 routes (inet6 etc.. is empty, IPv4 only) [EMAIL PROTECTED]> start shell pfe network ssb SSB platform (200/266Mhz PPC 603e processor, 64MB memory, 256KB flash) SSB1(re0 vty)# show nhdb zones Chip Start Size Rsvd Used/Hi Water/Total Size Name ---- ----- ----- ----- -------------------- ---- ---- 0 20000 01000 00000 0/0/512 8 Multicast RTP 0 21000 02400 00000 0/0/9216 1 Multicast Lists 0 23400 04400 00006 7202/8106/17408 1 Next-Hop Entries 0 27800 18800 0004b 28928/32532/50176 2 L2 Descriptors 0 40400 001ff 00000 3/3/63 8 L2 Programs 1 20000 01000 00000 0/0/512 8 Multicast RTP 1 21000 02400 00000 0/0/9216 1 Multicast Lists 1 23400 04400 00006 0/8106/17408 1 Next-Hop Entries 1 27800 18800 0004b 120/32532/50176 2 L2 Descriptors 1 40400 001ff 00000 2/3/63 8 L2 Programs [EMAIL PROTECTED]> start shell pfe network fpc0 FPC platform (PPC 603e processor, 8MB memory, 256KB flash) FPC0(vty)# show memory ID Base Total(b) Free(b) Used(b) % Name -- -------- --------- --------- --------- --- ----------- 0 39fa08 2491896 2118084 373812 15 Kernel 1 90600000 2097152 1773480 323672 15 Uncached [EMAIL PROTECTED]> start shell pfe network fpc1 FPC platform (PPC 603e processor, 8MB memory, 256KB flash) FPC1(vty)# show memory ID Base Total(b) Free(b) Used(b) % Name -- -------- --------- --------- --------- --- ----------- 0 39fa08 2491896 2119520 372376 14 Kernel 1 90600000 2097152 1783180 313972 14 Uncached [EMAIL PROTECTED]> show arp no-resolve | count Count: 7205 lines I really *can't* see any memory problems here, not at the SSB-E and not at the FPCs. Any hints? Thanks in advance! Regards, Nicolaj Kamensek -- Accelerated IT Services GmbH Schubertstrasse 10 D-67251 Freinsheim [EMAIL PROTECTED] http://www.accelerated.de/ Telefon: +49 6232 - 672568 Telefax: +49 6353 - 989039 HRB: 60665 - Amtsgericht Ludwigshafen UstID: DE253684415 Geschäftsführende Gesellschafter: Nicolaj Kamensek & Ole Krieger _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp