I'm trying to upgrade the CF card in a j2300 from 128M to 2gig. I know it can be done but for some reason I'm having problems with this. I have a 256meg usb drive plugged in and do a 'request system snapshot media usb as-primary partition' then 'request system halt media usb', swap out the cf cards, boot and it should boot up on the usb right? It doesn't seem to work. It tries to boot from the usb, fails and then fails on the CF.
AMIBIOS(C)2003 American Megatrends, Inc. BIOS Date: 03/18/04 14:17:20 Ver: 08.00.10 CPU : Intel(R) Celeron(R) CPU 1.60GHz Speed : 1.6 GHz Press DEL to run Setup (F4 on Remote Keyboard) Checking NVRAM.. Initializing USB Controllers .. Done. 1280MB OK USB Device(s): 1 Storage Device Auto-Detecting Pri Master..IDE Hard Disk Pri Master: SanDisk SDCFH-2048 HDX 4.04 Auto-detecting USB Mass Storage Devices .. Device #01 : SanDisk Cruzer Micro 01 USB mass storage devices found and configured. Booted because of Watch DOG timer timeout I'm not sure if it's even seeing the usb drive during boot. Am I doing something wrong or is there a better way to do this? Mike _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp