Jens, It is possible to do this on a per interface basis, not sure if you can do on a per node basis. Here is a sample syntax example.
[edit] [EMAIL PROTECTED] show interfaces ge-0/0/0 vlan tagging; unit 502 { vlan-id 502; family inet { policer { arp Block_ARP; } address 172.20.16.52/24; } } [edit] [EMAIL PROTECTED] show firewall policer Block_ARP { if-exceeding { bandwidth-limit 5m; burst-size-limit 50k; } } Cheers //Gunjan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, 28 June 2007 3:01 AM To: juniper-nsp@puck.nether.net Subject: [j-nsp] Ratelimiting ARP-Requests Dear colleagues, I'm looking for an advice about the possibilities to ratelimit incomming ARP requests. What's the correct syntax for an effective filter rule to solve this problem ? Kind Regards Jens _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp