Hello Ulisses, I would not know how to retrieve that information through the CLI.
On the other hand you my try the object jnxCosIfqQedPktRate as in the JUNOS MIB file "mib-jnx-cos.txt" jnxCosIfqQedPktRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate (expressed in packets per second) at which packets belonging to the the specified forwarding class were queued at the output on the given interface." ::= { jnxCosIfqStatsEntry 4 } Daniel ulisses wrote: > Hi > > I want to know the delay of the output queues of the interfaces, I could > not find any command that supplies this information. > > I found "show interfaces queue" command the most descriptive one but doesn't > reflect the instant/actual packets in the queue at a given moment. > > Any comment will be greatly appreciated > > regards > > Ulisses > _______________________________ __ ___________________________________ > /_/ > Network Operation Center __ __ Email: [EMAIL > PROTECTED] > RedIRIS/Red.es /_/ RedIRIS /_/ > Edificio Bronce __ Tel: + 34 912127625 > Pza. Manuel Gómez Moreno, s/n /_/ Urgencias: + 34 629148201 > E-28020 Madrid Fax: + 34 915568864 > > _________________ Spanish Academic & Research Network _______________________ > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Daniel Lete Murugarren HEAnet Limited, Ireland's Education and Research Network 1st Floor, 5 George's Dock, IFSC, Dublin 1 Registered in Ireland, no 275301 tel: +353-1-660 9040 fax: +353-1-660 3666 web: http://www.heanet.ie/ _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp