http://www.juniper.net/techpubs/software/junos/junos83/swconfig83-policy/id-10522406.html#id-10522406 Above section explains about configuring the Load-Balance Per-Packet Action. It talks about installing ECMP routes in the forwarding table. It is all perfectly fine. It also indicates that "You can configure per-packet load balancing to optimize VPLS traffic flows across multiple paths.". How do we get multipaths in a VPLS cloud? We establish pseudo wire to different edge routers and L2 flood/forward the traffic based on the FDB table. Even for redundancy if we multi-home, only one PE is chosen based on the BGP selection algorithm. If we allow the traffic to flow in both the nodes, won't that be against split horizon rule?
Regards, Monika _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp