I suppose that you use RSVP protocol to etablish the LSP. You can use the interface address or the router ID. I advise you to use router ID for a reason of scalability.
Regards, Samuel Monika M a écrit : > site1---PE1 ----- P1-----------P2-----------(x)-PE2----site2 > > I have BGP peering between PE1-PE2 for having L2VPN service. > L2VPN configuration steps mandate configuration of tunnel LSP establishment. > Should I have an LSP for the PE2's interface address x or PE2's router ID. > > TIA > Monika > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp