On Thu, Aug 09, 2007 at 10:49:18AM -0700, Chris Cappuccio wrote:
> I replaced a 96MB flash in an RE333 with a 1gb sandisk flash. My next
> step is to boot an install media and wipe the hard disk and flash.
> Unfortunately, the RE333 is not booting the install media. It doesn't
> even show up in dmesg. And when I hit 'del' to get into the BIOS, nothing
> happens, no matter how many different emulators and terminal types I try.
>
> The same install media works fine in any other RE333!
>
> I wonder if the hard disk controller that the flash is plugged into isn't
> just shut off for some reason? Is there any way to get into the bios or
> otherwise influence those settings on an RE333? It seems like its easy
> to get into the BIOS of an RE233, but this one won't respond to pressing DEL
> or
> much else.
Try checking the output of this command:
[EMAIL PROTECTED] sysctl -A | grep machdep.bootdevs
You may need to then do this:
# sysctl -w machdep.bootdevs=pcmcia-flash,compact-flash,disk,lan
--
Jared Mauch | pgp key available via finger from [EMAIL PROTECTED]
clue++; | http://puck.nether.net/~jared/ My statements are only mine.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
