Greetings, I'm wondering what the equivalent of this is for ospf3: http://www.juniper.net/techpubs/software/junos/junos81/swconfig81-routing/html/ospf-summary24.html
I'm looking to force ospf3 running on a GigE interface to function as if it were a point-to-point interface. e.g. # edit protocols ospf3 area 0.0.0.0 interface ge-0/0/0 # set interface-type p2p I noticed that somewhere between 7.2 and 8.1 the p2p statement was removed for ospf (and never showed up for ospf3) even though it is still mentioned in the first link for 8.1... http://www.juniper.net/techpubs/software/junos/junos72/swconfig72-routing/html/ospf-config.html http://www.juniper.net/techpubs/software/junos/junos81/swconfig81-routing/html/ospf-config.html Is there a reason this was removed, and is there some other way to force this behavior? The IOS equivalent would be the interface-level command: (config-if)#ipv6 ospf network point-to-point Thanks, ~Aaron _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp