On IQ cards such as the COC12, clocking can be set individually for OCx DSx, and T1 interfaces. On non-IQ, clocking is set at the parent level and while it can be set at the child level, it has no effect. That's my understanding, anyway:
http://www.juniper.net/techpubs/software/junos/junos84/feature-guide-84/ id-10060689.html#id-10060689 -evt > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Zhao, Wenmei (Sarah) > Sent: Wednesday, August 29, 2007 3:44 PM > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] T1 master/slave timing > > Hi All, > > I want to have master/slave timing in the Juniper router. > The external clocking source is the master. The card > is a channelized OC-3. > > Can that be done by setting clocking to external at the > OC-3 level and internal at the T1 level? Does this > institue a master/slave timing, or will the T1 setting > take precedence over the OC-3 level and it becomes > internal clocking? > > Thanks, > Sarah Zhao > http://www.geocities.com/redoakland/ > <http://www.geocities.com/redoakland/> > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp