Hey Louis, Yup, that's probably why the configurator (which I must say I've never used) fails. Reno, here's another URL that might help for clarifying different FPC's and some other stuff (follow the next signs :))
http://www.juniper.net/techpubs/hardware/m120/m120-pic/m120-pic-title.html Cheers, Erdem On 9/17/07, Louis Young <[EMAIL PROTECTED]> wrote: > > Hi all, > > I don't think this is what Rendo was trying to know. That is not related to > any PIC combination stuff. > > What Rendo tried to know is how to make hardware configuration using system > configurator just like dynamic configuration tools on Cisco website. > > There are normally 4 types of FPCs(flexible PIC concentrator, aka. mother > card holding PICs) on M120, cFPC/FPC1/FPC2/FPC3, each type holding different > category of PICs. > > Normally PICs with total bandwidth under 1Gbps(inclusive) are categorized as > type 1 PIC and to be held by FPC1, > PICs whose bandwidth between 4Gbps and 10Gbps are categorized as type 2 PIC > and to be held by FPC2, etc. > ... > > I think this is what Rendo was looking for. > > Just my 0.02 cents. > > Kind Regards, > Louis > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Erdem Sener > Sent: 2007年9月17日 14:30 > To: rendo > Cc: juniper-nsp@puck.nether.net > Subject: Re: [j-nsp] M120 hardware configuration > > Hi Rendo, > > Sorry I've read "M20" while I should read "M120" :) > > As far as I know there are no prohibited PIC combinations on M120. > You can refer to release notes documents for further information. > > Hope this helps, > Erdem > > On 9/17/07, rendo <[EMAIL PROTECTED]> wrote: > > Hi Erdem, > > > > PSN-2007-0-023 seems only valid for M5, M10, M20, M40, M40e, M160, > > M320, J20. > > Does it mean there is no limitation for M120? > > > > Thanks. > > > > -rendo- > > > > On 9/17/07, Erdem Sener <[EMAIL PROTECTED]> wrote: > > > > > > Hi Rendo, > > > > > > Juniper Technical Bulletin PSN-2007-01-023 summarizes the PIC > > > combination notes for different platforms (FPCs). > > > > > > Cheers, > > > Erdem > > > > > > On 9/17/07, rendo <[EMAIL PROTECTED]> wrote: > > > > Hi, > > > > > > > > Just wondering, does someone here know about the hardware > > > > configuration limitation in M120? Or maybe is there any specific > > > > datasheet/document > > > for > > > > this? > > > > > > > > I need this information because I just found that when I was using > > > > configurator tool, I can't put 4GE PIC and AS PIC in the same slot. > > > > > > > > I am trying to find at Juniper website but still no luck. > > > > > > > > Thanks. > > > > > > > > -rendo- > > > > _______________________________________________ > > > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > > _______________________________________________ > > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > >
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp