The following URL may help to explain: http://juniper.cluepon.net/index.php/Load_Balancing
as would the official JUNOS doc on the matter: http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-routing/id-10480125.html As for workarounds, sounds like getting the Internet Processor I ASIC would be the only way (and I can't help but think that such a move would be generally discouraged). NB: the first site is neither affiliated nor endorsed by Juniper Networks..but contains good info. David On 20/09/2007, Nick Kraal <[EMAIL PROTECTED]> wrote: > Dear all, > > As I understand it, Juniper routers do not support per packet load > balancing on multiple interfaces similar to Cisco, and only in a per > flow fashion. > > Is there is any workaround for this? > > Regards, > > -nick/ > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp