I just went through some older post which states that even AS-PIC also requires FPC-E. Does Multilink Services PIC also requires FPC-E PIC ?
Regards, Samit Richard A Steenbergen wrote: > On Fri, Nov 09, 2007 at 06:02:29PM +0100, Jeff Tantsura wrote: >> Hi Samit, >> >> No, LACP is supported on any ethernet (not sure about really old ones) >> interfaces. >> Any relatively new Catalist should support LACP as well, if you are going to >> use SX optic on juniper, use SX on cisco as well :) > > LACP is supported everywhere, but if you're doing to do LACP + > vlan-tagging on the AE you need at least an FPC-E. Original FPCs on > classic martini architecture (M5-M160) will do one or the other, but not > both simultaniously. > > Also, my random tidbit of advice for the day... Don't configure native > vlan tagging on a Cisco and then try to speak LACP to a Juniper, it will > try to tag the LACP control packets with the native vlan ID and confuse > the hell out of the Juniper. :) > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp