What size is your ad0 device? Show chassis hardware detail should say... You may need to upgrade it first.
Jared Mauch On Dec 19, 2007, at 5:09 PM, "chiel" <[EMAIL PROTECTED]> wrote: > Hi all, > > I want to upgrade a M5 from 6.2R2.4 to 8.5R1.14. But I don't have a > PCMCIA card, see bellow: > > root> request system software add non-validate reboot /var/tmp/ > jinstall-8.5R1.14-export-signed.tgz > Installing package '/var/tmp/jinstall-8.5R1.14-export-signed.tgz' ... > Verified MD5 checksum of jinstall-8.5R1.14-export.tgz > Adding jinstall... > > WARNING: This installation will not succeed. > WARNING: The boot device is less than 256M. > WARNING: A hardware upgrade is required. > > pkg_add: package /var/tmp/instmp.RJ7Ung/jinstall-8.5R1.14-export.tgz > fails requirements - not installed > pkg_add: install script returned error status > > root> > > > Is there any way to upgrade without a PCMCIA card? I coudn't find > anything on this mailing list/google. > > chiel > > > > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp