On Dec 27, 2007 2:06 PM, Wayne Lansdowne <[EMAIL PROTECTED]> wrote:
> I'm new to the Juniper routers having previously worked with Riverstone.
> Within the Riverstone CLI I had the ability to preview all the pending
> (non-committed) changes via a 'scratchpad' command. Does the Juniper
> have a similar feature? I'm unable to find anything thus far to display
-------------------------------------------------------------------------
--- [EMAIL PROTECTED] wrote:
[edit]
show | compare
--------------------------------------------------------------------------
Since you're new to JUNOS... One thing I liked to do early on is see a list of
the commands that're used to configure the router.
RE0> configure
Entering configuration mode
{master}[edit]
RE0# show | display set
Do this to let them all go past the screen, rather than a screen at a time:
{master}[edit]
RE0# show | display set | no-more
scott
------------
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
