Thank you very much for helping me out :>>>>> ----- Original Message ----- From: "Alain Briant" <[EMAIL PROTECTED]> To: "M.Mihailidis" <[EMAIL PROTECTED]>; <juniper-nsp@puck.nether.net> Sent: Monday, January 21, 2008 10:58 AM Subject: Re: [j-nsp] Ospf neighborship
> Hi > > I told you something wrong concerning GRE tunnels as I did some other > tests and realized I was wrong > > I've checked also unnumberred interfaces witch seem to be possible on > Ethernet interfaces in version 8.3 or 8.5 > But documentation says precisely that it not possible to run OSPF in this > case: > http://www.juniper.net/techpubs/software/junos/junos83/swconfig83-network-interfaces/html/interfaces-family-config18.html > > "Running OSPF and IS-IS on unnumbered Ethernet interfaces is not > supported" > > I will tell you if I find any workaround > regards > Alain > > > > > > M.Mihailidis a écrit : > >> im using j series and ethernet interfaces to which unnumbered doesnt work >> any help welcome >> ----- Original Message ----- From: "BRIANT Alain" <[EMAIL PROTECTED]> >> To: "M.Mihailidis" <[EMAIL PROTECTED]> >> Sent: Saturday, January 19, 2008 12:01 AM >> Subject: Re: [j-nsp] Ospf neighborship >> >> >> Hi >> >> I have made some tests and realized I told you something wrong. >> In the case of the config I though of, I am using interfaces address >> in the ospf exchanges. >> >> >> What kind of router are you using J,M, T series ? >> On witch kind of interface? Lan or other type ? >> >> I am trying to find how to achieve that. >> >> Regards >> Alain >> >> >> >> >> Quoting "M.Mihailidis" <[EMAIL PROTECTED]>: >> >>> any hints on how to do that? >>> >>> >>> >>> ----- Original Message ----- From: "BRIANT Alain" <[EMAIL PROTECTED]> >>> To: "M.Mihailidis" <[EMAIL PROTECTED]> >>> Cc: "Juniper-Nsp" <juniper-nsp@puck.nether.net> >>> Sent: Friday, January 18, 2008 7:54 PM >>> Subject: Re: [j-nsp] Ospf neighborship >>> >>> >>> Hi >>> >>> You can use unnumbered GRE-tunnel. >>> >>> Regards >>> Alain >>> >>> >>> >>> >>> >>> >>> Quoting "M.Mihailidis" <[EMAIL PROTECTED]>: >>> >>>> hello >>>> is there a way to have ospf adjacencies with the loopback interface and >>>> how? >>>> i tried with ethernet unnumbered refrenced to a loopback and didnt >>>> worked >>>> i tried ethernet with ip address and passive in the ospf proccess >>>> and that didint work either >>>> Thanks >>>> _______________________________________________ >>>> juniper-nsp mailing list juniper-nsp@puck.nether.net >>>> https://puck.nether.net/mailman/listinfo/juniper-nsp >>>> >>>> >>> >>> >> > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp