Take a look at the [edit forwarding-options] section, specifically the 'hash-key' section for multiservice if you're just doing L2 across the bundle:
http://www.juniper.net/techpubs/software/junos/junos85/swconfig85-policy/id-10568390.html David On 28/01/2008, a. r.isnaini. rangkayo sutan <[EMAIL PROTECTED]> wrote: > Hi, > > Any suggestion will be very appreciated. > > Here's the scheme : > Ports aggregation with trunking was success between Juniper - Cisco > Catalyst, but i'm having problem with the load that is not balanced on > each port. > > It might be the config still missing one line somewhere :) > > interfaces { > fe-0/2/0 { > fastether-options { > 802.3ad ae1; > } > } > fe-0/2/1 { > fastether-options { > 802.3ad ae1; > } > } > > ae1 { > description FAST-ETHER-CHANNEL-2FE-AGGREGATED; > vlan-tagging; > aggregated-ether-options { > minimum-links 2; > link-speed 100m; > > - a. r. i. rangkayo sutan > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp