Hi, Yes, you cannot assign 10::14/126 which 4 I believe is network ID for /126 (/30 in ipv4), before 10::14/126 there should 10::/126.
If you still want you this /126, please set to 10::15/126 should be fine. rgs a. rahman isnaini rangkayo sutan. snort bsd wrote: > Hi all: > >>From RFC4291, the IPv6 addressing scheme is more like nowadays IPv4 VLSM. But >>IPv6 doesn't have "broadcasting addresses". Then how does that affect IPv6 >>addressing? > > Say, fec0:10:10:10::/64, intuitively we know that we can't use the first > address, does that mean we can use rest of addresses? what about > fec0:10:10:10::14/126? I tested on a router (M5) and it would not take it. > Here what i got after I tried to commit: > > 'address 2:10::14/126' > Cannot assign address 0 on subnet > error: configuration check-out failed > > > Then later tried fec0:10:10:10::14/125 and the interface took it. > > Thanks all > > Dave > > > > > Make the switch to the world's best email. Get the new Yahoo!7 Mail > now. www.yahoo7.com.au/worldsbestemail > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
