No it is not possible. For this use there are the route-filter. Regards, Samuel
Amos Rosenboim a écrit : > Hi List, > > This reminds me: > Is it possible to have different match type for each different line in > the prefix-list (similar to the Cisco implementation)? > > Amos > > On Feb 7, 2008, at 2:33 PM, Samuel wrote: > >> Hi Jonathan, >> >>> Regarding the default behavior in firewall filters, there is no way >>> you can have an 'exact' match, since all source addresses are /32s by >>> definition. Therefore, the behavior of matching all addresses within >>> the prefix is the only reasonable behavior. >>> >> Yes it's right. >>> And, you can actually apply different match types to prefix lists in >>> routing policy now. Use the 'prefix-list-filter' configuration >>> statement. >>> >>> For example: >>> >>> [edit policy-options policy-statement example term example] >>> [EMAIL PROTECTED] set from prefix-list-filter internal-routes ? >>> Possible completions: >>> exact Exactly match the prefix length >>> longer Mask is greater than the prefix length >>> orlonger Mask is greater than or equal to the prefix >>> length >>> >> Thanks for this tip! >> >> Regards, >> Samuel >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp