Hi all, Does anybody know why my J-series 4300 router two PIM cards does work ? Dual-Port Fast Ethernet PIM (FPC 3) and Dual-Port Synchronous Serial PIM (FPC 1)
show chassis hardware Hardware inventory: Item Version Part number Serial number Description Chassis JN001874AB J4300 Midplane REV 05 710-010001 AD04480673 System IO REV 07 710-010003 AE05070354 System IO board Routing Engine REV 08 750-010005 BTRD50100197 RE-J.2 FPC 0 FPC PIC 0 2x FE FPC 1 REV 05 750-010356 AG06254051 FPC FPC 3 REV 04 750-010353 AF06253531 FPC Power Supply 0 show chassis firmware Part Type Version FPC 0 ROM Juniper ROM Monitor Version 6.4b10 O/S Version 8.5R1.14 by builder on 2007-12-08 0 FPC 1 FPC 3 FWDD O/S Version 8.5R1.14 by builder on 2007-12-08 0 show interface ter Interface Admin Link Proto Local Remote fe-0/0/0 up down gr-0/0/0 up up ip-0/0/0 up up ls-0/0/0 up up lt-0/0/0 up up mt-0/0/0 up up pd-0/0/0 up up pe-0/0/0 up up sp-0/0/0 up up sp-0/0/0.16383 up up inet fe-0/0/1 up down dsc up up gre up up ipip up up lo0 up up lo0.16385 up up inet 10.0.0.1 --> 0/0 10.0.0.16 --> 0/0 lsi up up mtun up up pimd up up pime up up pp0 up up tap up up show chassis fpc detail Slot 0 information: State Online Total CPU DRAM 32 MB Start time 2008-02-12 17:03:43 UTC Uptime 25 minutes, 1 second Slot 1 information: State Present Reason --- Hardware PCI Device Unrecognized --- Slot 3 information: State Present Reason --- Hardware PCI Device Unrecognized --- _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp