Hey Ovais, You're missing the 'template' user, as described in the following urls:
http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-system-basics/id-10615692.html#id-10615692 http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-system-basics/id-10674699.html#id-10674699 HTH, Erdem On Mon, Feb 25, 2008 at 10:58 AM, Ovais Iqbal <[EMAIL PROTECTED]> wrote: > Hi all, I am using junos 7.5 and cisco ACS 3.3. > > I want to authenticate users using Radius juniper in cisco ACS. but i want > to ask that is it necassary to configure local user accounts to make > authentication successfull ?? > > This is my configuration > > authentication-order [ radius ]; > radius-server { > 10.1.1.23 { > secret "$9$L.QN-wYgoGjqM8aZ"; ## SECRET-DATA > source-address 10.1.12.7; > } > > but if i am only using this configuration authentication is not successful, > if i add these commands > login { > user ovais { > full-name OIqbal; > uid 2001; > class super-user; > authentication { > encrypted-password "$1$I.YS0Q0h$tTgJT8l8xCUNNbtXB3rmw0"; ## SECRET-D > ATA > Then it just authenticates the user with login name OIqbal and no other > users, can any1 tell me why is it necassary to configure local user accounts > > > > --------------------------------- > Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it > now. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp