hi, i have two m7i boxes. I use vrrp for redundancy and track the OUT interface with the following configuration.
Router1> show configuration interfaces ge-0/0/0 unit 0 { family inet { filter { output FILTER2; } address 193.140.71.4/24 { vrrp-group 0 { virtual-address 193.140.71.6; priority 100; preempt; authentication-type md5; authentication-key ## SECRET-DATA track { interface ge-1/3/0.0 { priority-cost 10; Router2> show configuration interfaces ge-0/0/0 unit 0 { family inet { filter { output FILTER2; } address 193.140.71.5/24 { vrrp-group 0 { virtual-address 193.140.71.6; priority 95; preempt; authentication-type md5; authentication-key ## SECRET-DATA However now i have to put a new device (switch) between my router and my ISP connection. Normally my vrrp configuration can not detect the line problems. Is there any solution for this configuration. ---------- | R | ge-1/3/0---------SW---------ISP ---------- Is it possible to write a script that can check my neighbour and disable the interface in case the line is down. -- Erol KAHRAMAN System Network Administrator _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp