> Im working on testing of Metro Ethernet Solution and want to integrate it > with Juniper M7i - Gig interface. The main implementation that is required > to configure Q-in-Q (Stacked VLAN setup) over Juniper M7i with Gig Interface > to aggregate MPLS VLANs and carry it to other PE.
Note that you need IQ or IQ2 GigE PICs to terminate stacked VLANs. > Scenario is something like this, > > Juniper-CE (VLAN 3) ===Trunk===(Metro Ethernet Access Switch [Q-in-Q] SVLAN > 300-CVLAN 3)===MEN Ring====(Metro Ethernet Access Switch [Q-in-Q] SVLAN > 300-CVLAN 3)= ==Trunk===Juniper-PE (SVLAN 300 - CVLAN 3) > > At Juniper M7i, i have check there are certain options to configure Stacked > VLAN or Q-in-Q. Consider if i configure /30 network for PE-CE connectivity > what will the configuration of Juniper PE Gig Interface. This is a rather straightforward setup, if I understand your question correctly. Something like this on the PE: ge-0/0/0 { stacked-vlan-tagging; encapsulation flexible-ethernet-services; unit 1 { vlan-tags outer 300 inner 3; family inet { address a.b.c.d/30; } } } Steinar Haug, Nethelp consulting, [EMAIL PROTECTED] _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp