You could maybe try to enable md5 auth for ISIS, which would serv as a protection mechanism as well for packet corruption.
HTH Erdem On Tue, Jun 10, 2008 at 3:59 PM, <[EMAIL PROTECTED]> wrote: > > Hi all, > > I encountered some problems to established ISIS between a T640 and a > Redback SE800 through an AE. > The ISIS level 2 adjacency is well established but the LSP send by the > Redback (correct on the redback) seems to be corrupt on the T640 (I've > only the hearder and the sequence number is 0). > > > T640 ------AE8.1500 -------Redback (Virtual routeur VR1) > > Do you have a idea regarding this issue ? > Thanks > Regards, > david > > > > ********************************* > This message and any attachments (the "message") are confidential and > intended solely for the addressees. > Any unauthorised use or dissemination is prohibited. > Messages are susceptible to alteration. > France Telecom Group shall not be liable for the message if altered, changed > or falsified. > If you are not the intended addressee of this message, please cancel it > immediately and inform the sender. > ******************************** > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
