I'm working on a NAT setup, which is actually very straightforward but i still am puzzled by the services documentation from Juniper. Please help :).
It's a J2300 with 2 interfaces, in and out. One public IP address and a local subnet on the inside. I got the network translation from the inside to the public ip working, but now i want to configure one single port-forward to an internal host (let's say 10.0.0.1) on port 80. But how? On a cheap $50 router it's a point-and-click, but it's not even in J-web?! The config i have now : services { service-set wan-service-set { nat-rules nat-set; interface-service { service-interface sp-0/0/0; } } nat { pool nat-pool { address-range low 217.21.x.x high 217.21.x.x; port automatic; } rule nat-set { match-direction input; term 1 { from then { translated { source-pool nat-pool; translation-type { source dynamic; } } } } } } } -- Kind regards, Signet bv Remco Bressers T 040 - 707 4 907 F 040 - 707 4 909 E [EMAIL PROTECTED] _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp